Geometric thickening and its component comparison
Setting
For a space X with continuous height f : C(X, ℝ), C_f = intervalComponents f sends an open
interval I to the path components of f ⁻¹ I, with paths inside the inverse image (see
reeb-components.md). For ε : ℝ≥0, thicken ε I = I + [-ε, ε] is the interval thickening of
reeb-intervals.md, with thicken 0 I = I and thicken ε ⊥ = ⊥, and smoothing ε is the
smoothing endofunctor of reeb-smoothing.md, so ((smoothing ε).obj C_f).obj I is the set of path
components of f ⁻¹ (thicken ε I). Interval thickening is the expansion Ω_ε of open intervals;
this digest is about the thickening T_ε of spaces over ℝ.
For a continuous h : C(X, Z) with g ∘ h = f, intervalComponentNatTrans h comm : C_f ⟶ C_g
sends the class of x to the class of h x (see reeb-constructible-comparison.md). The interval
component functor intervalComponentsOver on the real slice Over (TopCat.of ℝ) acts on objects by
C of the structure map and on morphisms by intervalComponentNatTrans (see
reeb-rgraph-cosheaf-equivalence.md).
The thickened space
Band ε = Set.Icc (-ε) ε
height f ε : C(X × Band ε, ℝ), height f ε (x, t) = f x + t
map g ε : C(X × Band ε, Y × Band ε), map g ε (x, t) = (g x, t)
zeroSection X ε : C(X, X × Band ε), zeroSection X ε x = (x, 0)
Band ε carries the subspace topology of ℝ; it is an abbreviation, so Set.projIcc and the
convexity of Set.Icc apply to it directly.
map g εis defined for every continuousg. Whenh ∘ g = fit preserves height (height_map), andmap_idandmap_comphold byrfl.- The zero section does not depend on a height. It preserves height (
height_zeroSection) and is natural on points (map_comp_zeroSection). - For
ε ≤ δ, band enlargementbandInclusion X hεδ : X × Band ε → X × Band δis the identity on coordinates and preserves height (height_bandInclusion). bandHomeomorph f ε : X × Band ε ≃ₜ {(x, u) : X × ℝ | u - ε ≤ f x ∧ f x ≤ u + ε}sends(x, t)to(x, f x + t), with inverse(x, u) ↦ (x, u - f x)(coe_bandHomeomorph_apply,bandHomeomorph_symm_apply). The thickened height becomes the second coordinate (snd_bandHomeomorph).
Inverse images
For an open interval I, write A(I) = {(x, t) | f x + t ∈ I} for the inverse image under the
thickened height and B(I) = {x | f x ∈ thicken ε I}. The first projection
preimageProjection f ε I : C(A(I), B(I)), (x, t) ↦ x
is well defined: y = f x + t ∈ I satisfies |f x - y| = |t| ≤ ε (fst_mem_thicken). For
ε > 0 the first projection does not preserve height in general: it sends a point of height
f x + t to one of height f x. Only at ε = 0, where t = 0, is it height-preserving (zeroHomeomorph below).
The clamp. For c, s : ℝ, clamp ε c s = max (-ε) (min ε (c - s)) lies in the band; it is
Set.projIcc (-ε) ε _ (c - s) and is continuous in s. If c ∈ I and s ∈ thicken ε I, pick
y ∈ I with |s - y| ≤ ε. Then s + clamp ε c s lies between c and y:
- if
c - slies in the band, it isc; - if
c - s > ε, it iss + ε, andy ≤ s + ε < c; - if
c - s < -ε, it iss - ε, andc < s - ε ≤ y.
Since I is order-connected, s + clamp ε c s ∈ I (add_clamp_mem). The argument uses no
positive radius and no finite endpoint: it holds for every open interval, including rays and ℝ,
and for ε = 0.
The homotopy equivalence. Let c be a point that lies in I whenever I is nonempty. The
section q(x) = (x, clamp ε c (f x)) maps B(I) into A(I), because B(I) is empty unless I is
nonempty (nonempty_of_mem_thicken). Then p ∘ q = id exactly
(preimageProjection_comp_preimageSectionAt), and
H(r, (x, t)) = (x, (1 - r) · clamp ε c (f x) + r · t), r ∈ [0, 1]
is a homotopy from q ∘ p to the identity of A(I) (preimageHomotopyAt). With
λ = clamp ε c (f x), the band is convex, and
f x + ((1 - r) λ + r t) = (1 - r)(f x + λ) + r (f x + t) is a convex combination of two points of
I (interp_mem_band, interp_mem). This gives preimageHomotopyEquivAt.
preimageHomotopyEquiv f ε I uses c = intervalCenter I, a chosen point of I when I is
nonempty (intervalCenter_mem), so it exists for every open interval I, including ⊥, and every
ε ≥ 0, with no hypothesis on X, which may be empty. Its forward map is the projection itself,
by rfl (preimageHomotopyEquiv_toFun, coe_preimageHomotopyEquiv_apply). The section, the
point c and the homotopy are choices; only the forward map is part of the interface.
The projection is natural on points in two ways, both by rfl:
- for
I ≤ J, it commutes with the inclusionsA(I) ⊆ A(J)andB(I) ⊆ B(J)(preimageProjection_comp_inclusion); - for
g : X → Ywithh ∘ g = f, it commutes withmap g εonA(I)and withgonB(I)(preimageProjection_comp_restrict).
The comparison
componentComparison f ε : intervalComponents (height f ε) ⟶ (smoothing ε).obj (intervalComponents f)
(componentComparison f ε).app I = π₀ (preimageProjection f ε I)
On representatives it sends the class of (x, t) to the class of x
(componentComparison_app_mk). Naturality in the interval (componentComparison_naturality) is
π₀ of the first square above. At every I, its component is the forward map of the
path-component bijection componentEquivOfHomotopyEquiv of the homotopy equivalence
(componentComparison_app_eq_componentEquiv), so it is bijective
(componentComparison_app_bijective). The instance isIso_componentComparison follows, and
componentComparisonIso f ε is asIso of the comparison, with hom the comparison itself
(componentComparisonIso_hom).
Three equations of natural transformations hold, each by evaluation on representatives:
- Naturality in maps. For
g : X → Ywithh ∘ g = f,intervalComponentNatTrans (map g ε) _ ≫ componentComparison h ε = componentComparison f ε ≫ (smoothing ε).map (intervalComponentNatTrans g comm)(componentComparison_natural). - Unit.
intervalComponentNatTrans (zeroSection X ε) _ ≫ componentComparison f ε = (smoothingUnit ε).app (intervalComponents f)(zeroSection_comp_componentComparison). On representatives, the class of(x, 0)goes to the class ofxinf ⁻¹ (thicken ε I), which is the smoothing unit of the class ofx(componentComparison_app_zeroSection_mk). The reason is thatp ∘ τ^εis the inclusionf ⁻¹ I ⊆ f ⁻¹ (thicken ε I)on points. - Band enlargement. For
ε ≤ δ,intervalComponentNatTrans (bandInclusion X hεδ) _ ≫ componentComparison f δ = componentComparison f ε ≫ (smoothingMap hεδ).app (intervalComponents f)(bandInclusion_comp_componentComparison).
The real slice
functor ε : Over (TopCat.of ℝ) ⥤ Over (TopCat.of ℝ)
zeroSectionNatTrans ε : 𝟭 _ ⟶ functor ε
zeroIso : functor 0 ≅ 𝟭 _
componentComparisonNatIso ε : functor ε ⋙ intervalComponentsOver ≅ intervalComponentsOver ⋙ smoothing ε
functor ε sends A to A.left × Band ε with height height (overBaseMap A) ε
(overBaseMap_functor_obj) and a slice morphism φ to map φ.left.hom ε
(functor_map_left_hom). It acts on every morphism of the slice, that is, on every continuous
height-preserving map. The zero section is a natural transformation 𝟭 ⟶ functor ε
(zeroSectionNatTrans_app_left_hom).
At ε = 0 the band is {0} (eq_zero_of_mem_band_zero), and the first projection
zeroHomeomorph X : X × Band 0 ≃ₜ X is a homeomorphism with inverse the zero section
(zeroHomeomorph_apply, zeroHomeomorph_symm_apply). It preserves height:
f (zeroHomeomorph X z) = height f 0 z (apply_zeroHomeomorph). zeroIso has the zero
homeomorphisms as components over ℝ (zeroIso_hom_app_left_hom) and the zero section as inverse
(zeroIso_inv, zeroIso_inv_app_left_hom).
componentComparisonNatIso ε has component componentComparison (overBaseMap A) ε at A
(componentComparisonNatIso_hom_app), so it reuses intervalComponentsOver and the unbundled
comparison. On the slice:
- the unit equation holds objectwise,
intervalComponentsOver.map ((zeroSectionNatTrans ε).app A) ≫ (componentComparisonNatIso ε).hom.app A = (smoothingUnit ε).app (intervalComponentsOver.obj A)(map_zeroSectionNatTrans_comp_componentComparisonNatIso); - and as natural transformations
𝒞 ⟶ 𝒞 ⋙ S_ε,whiskerRight (zeroSectionNatTrans ε) intervalComponentsOver ≫ (componentComparisonNatIso ε).hom = whiskerLeft intervalComponentsOver (smoothingUnit ε)(whiskerRight_zeroSectionNatTrans_comp_componentComparisonNatIso), with no unitors, since𝟭 ⋙ 𝒞and𝒞 ⋙ 𝟭are definitionally𝒞; - at
ε = 0,π₀ofzeroIsois the comparison followed bysmoothingZeroIso(map_zeroIso_hom_app).
For ε > 0 the first projection does not preserve height in general and is never packaged as a
slice morphism; at ε = 0 it is the height-preserving zeroHomeomorph underlying zeroIso.
Names and universes
height, map, map_id, map_comp, componentComparison and its _app_mk, _natural and
_naturality lemmas share their short names with declarations in ReebQuotient or
CylinderPresentation. When one of those namespaces is also open, refer to these declarations by
qualified name, for example GeometricThickening.height.
The unbundled statements hold at an arbitrary carrier universe u, with interval components at
value universe u. map, height_map, map_id and map_comp allow independent carrier
universes; statements through componentNatTrans, preimageRestrict or
intervalComponentNatTrans put both spaces in one universe, as those declarations require. The
slice packaging is in universe 0, as intervalComponentsOver is.
Fixtures
TDA.Reeb.GeometricThickeningExamples works with the comparison into the smoothing:
- Every kind of open interval. For arbitrary
Xandf, both inverse images are empty at⊥(bot_isEmpty), and the comparison is bijective at⊥,ioo a b,ioi a,iio band⊤. ε = 0. The clamp is0(clamp_zero), clamp membership holds for an arbitrary interval (add_clamp_mem_zero), and the comparison is bijective (bijective_zero).- Empty space. At every universe, both sides are empty (
empty_isEmpty) and the comparison is bijective (empty_bijective). - Constant height on a point. The thickened point
(*, 1)has height1, while the projected point has height0(point_projection_not_height_preserving). - Constant height on
[0, 1]. Atε = 1andI = ℝthe first projection is not injective (interval_projection_not_injective), while the comparison is bijective (interval_bijective_top). - Collapse.
Bool → PUnitover height0is a noninjective height-preserving map. Both composites of its component square send the class of(true, 0)to the class of the point, by evaluation and from the general theorem (collapse_square_mk,collapse_square). The target is a single class, so this square alone cannot detect a wrong map. - Exchange.
Bool.notover height0(swapB). Both composites of its component square send the class of(true, 0)at⊤to the class offalse(swap_square_mk,swap_square), and the classes offalseandtruediffer (swap_target_distinct). - Reparametrization.
bandHomeomorphsends(true, 0)to(true, 0)over height0(bandHomeomorph_point).
Source correspondence
de Silva, Munch and Patel, Categorified Reeb Graphs, §4.3 and §4.4:
- Definition 4.22 sets
X_ε = X × [-ε, ε],f_ε(x, t) = f(x) + tandT_ε[α](x, t) = (α(x), t); these areBand,height,mapandfunctor. The definition writesT_ε[α] : (X_ε, f_ε) → (Y_ε, f_ε)forα : (X, f) → (Y, g); the target height must beg_ε, which isheight_map. - Observation 4.23, the natural zero section
τ^ε, iszeroSection,map_comp_zeroSectionandzeroSectionNatTrans. - Lemma 4.25 states that the first projection restricts to a homotopy equivalence
f_ε⁻¹(I) → f⁻¹(I^ε)for each intervalI. Its proof writesI = (a, b)and givesλas an example inside an open parallelogram, whose interior is empty atε = 0. The proof only needsλ(s) ∈ [-ε, ε]ands + λ(s) ∈ I; the clamp meets both conditions for every open interval, including∅, rays andℝ, and for everyε ≥ 0. The homotopy is the source's straight line int; convexity of the band and ofIreplaces "meets each fiber in an interval". The source does not discuss emptyI, which needs no separate case here. - Theorem 4.24 states
𝒞T_ε ≅ S_ε𝒞. Its proof sets(ρ_f)_I = π₀[p_I], which iscomponentComparison_app, and checks naturality inIand inαby two squares of spaces, which arepreimageProjection_comp_inclusionandpreimageProjection_comp_restrict.componentComparisonNatIsois the theorem on the real slice. - The proof of Theorem 4.27 (Figure 8) reparametrizes
X_εasX̃_ε = {(x, u) ∈ X × ℝ | u - ε ≤ f(x) ≤ u + ε}with heightu; this isbandHomeomorph. - Proposition 4.35 (§4.4) is stated for ℝ-graphs, with
U_ε = ℛT_ε, the transformationζgiven by the zero section followed by the Reeb quotient, and the isomorphism of Proposition 4.32, which composes Theorems 3.17 and 4.24. Its proof evaluates atIand reduces to a square of spaces with three maps: the zero sectionLintof_ε⁻¹(I), the inclusionR : f⁻¹(I) ⊆ f⁻¹(I^ε), and the homotopy inverseHof Lemma 4.25. It shows thatLandHRare homotopic by a fiberwise straight-line homotopy. With the projectionpin place ofH, the squarep ∘ L = Rholds on points, sincep(x, 0) = x, so the corresponding equation ofπ₀maps holds exactly on representatives, with no homotopy. That equation is the unit equation above, the part of the square of Proposition 4.35 that involvesT_εand Theorem 4.24; it holds for every space overℝ.
Not claimed here: that the first projection is a map over ℝ or a slice morphism for ε > 0;
naturality of the homotopy inverse, of the chosen point or of the homotopy in I or in maps; Reeb
graphs of thickenings, or Proposition 4.35 for ℝ-graphs. Constructibility of the thickenings of
ℝ-graphs (Proposition 4.26), by the rest of the proof of Theorem 4.27 on graph input, is in
reeb-rgraph-thickening.md, and Theorem 4.27 for all constructible ℝ-spaces is in
reeb-thickening-constructible.md, with componentComparisonNatIso lifted to constructible ℝ-spaces
and cosheaves in reeb-thickening-cosheaf-comparison.md; the geometric smoothing U_ε = ℛT_ε of ℝ-graphs, with Proposition
4.35 for ℝ-graphs, is in reeb-rgraph-smoothing.md. The addition map T_ε T_δ → T_(ε+δ), its lax
coherence and the failure of T_ε T_δ ≅ T_(ε+δ) on a point are in
reeb-geometric-thickening-addition.md.