Thickenings of constructible ℝ-spaces: shared tools

Setting

A cylinder presentation P : CylinderPresentation n with levels S : CriticalValues n has vertex pieces V i, edge pieces E e and continuous endpoint maps; its realization X = P.Realization S is the quotient of (Σ i, V i) ⊕ (Σ e, E e × [a e, a (e+1)]) by the two endpoint identifications per edge (see reeb-constructible-space.md). The thickening is X × Band ε with Band ε = [-ε, ε] and height f x + t (see reeb-geometric-thickening.md).

The pieces are arbitrary topological spaces. Nothing below assumes that a piece, the realization or the thickening is Hausdorff, compact or locally path-connected. This note records the shared point-set tools and the morphisms of presentations used to describe the thickening of such a realization; no statement of the source is claimed by them alone.

Point-set tools

TDA.Topology.QuotientProduct proves two product facts for quotient maps.

  • Locally compact factor. For a quotient map q : A → B and a locally compact space I, the maps q × id_I and id_I × q are quotient maps (isQuotientMap_prodMap_id_left, isQuotientMap_prodMap_id_right). There is no separation hypothesis on A or B. The proof identifies open sets with continuous maps to the Sierpiński space and uses the exponential law for the locally compact factor (mathlib's IsQuotientMap.continuous_lift_prod_left). Compact real intervals [a, b], including empty and one-point intervals, are the case used (isQuotientMap_prodMap_id_Icc).
  • Proper factor. A proper surjection f stays a quotient map after product with the identity of an arbitrary space E (isQuotientMap_prodMap_id_of_isProperMap): id_E × f is proper, hence closed, continuous and surjective. A continuous surjection from a compact space onto a Hausdorff space is proper, so the same holds for it with E arbitrary (isQuotientMap_prodMap_id_of_compactSpace). Only the source and the target of f carry these hypotheses. This is the form intended for the scalar polygon and gluing maps of a thickened cylinder, which go between compact subsets of ℝ or ℝ × ℝ. Product stability is not claimed for arbitrary quotient maps; it fails in general.

Fixtures (TDA.Topology.QuotientProductExamples): the sign map x ↦ 0 < x from ℝ onto the Sierpiński space is a quotient map onto a non-Hausdorff space, and its product with [0, 1] is a quotient map onto the non-Hausdorff space Prop × [0, 1]; the map (s, u) ↦ (s u, u) from the square onto the triangle 0 ≤ x ≤ u ≤ 1 collapses the edge u = 0 to a corner and stays a quotient map after product with any space.

Presentation morphisms

TDA.Reeb.ConstructibleHom defines morphisms of presentations over the same number of levels.

  • CylinderPresentation.Hom P Q consists of continuous maps V i → V' i and E e → E' e with left' ∘ edge e = vertex e.castSucc ∘ left and right' ∘ edge e = vertex e.succ ∘ right. Identity, composition and their laws hold componentwise.
  • On a fixed level list S, Hom.realize is the continuous map of realizations that is the vertex map on vertex points and edge e × id on cylinder points (realize_ofVertex, realize_ofCylinder, realize_ofStrip). It is the descent of Hom.compatibleMaps through the universal property lift, preserves height (height_realize) and is functorial (realize_id, realize_comp). In universe 0, Hom.toOverHom is the corresponding morphism of the real slice, with identity and composition laws.
  • A map of finite data is a morphism of the discrete presentations (FiniteReebData.Hom.toPresentationHom), and its realization is realizeHom (realize_toPresentationHom).

Such morphisms keep the grid and the cylinder parameter: a height-preserving map of realizations that moves cylinder points along the parameter, or changes the level list, is in general not a realized morphism.

Thickened raw pieces

For every locally compact I, quotMk × id_I : Raw × I → X × I is a quotient map (isQuotientMap_prodMap_quotMk), and two raw pairs have the same image exactly when their normal forms and their second coordinates agree (prodMap_quotMk_eq_iff). For I = Band ε (isQuotientMap_rawBandMap), X × Band ε is the quotient of the thickened raw pieces Σ V i × Band ε ⊕ Σ E e × [a e, a (e+1)] × Band ε by the endpoint identifications, each times the identity of the band. A continuous map out of X × Band ε is therefore the same as a family of continuous maps on the thickened vertex pieces and cylinders satisfying the two endpoint equations.

This replaces a general statement that realization commutes with colimits of attachment diagrams: the diagrams used for the thickening are over one fixed grid, their maps are presentation morphisms, and their colimit is described by this quotient together with lift and hom_ext. No theorem about arbitrary colimits of constructible spaces, and no general restriction of quotient maps to subsets, is claimed.

Fixtures (TDA.Reeb.ConstructibleHomExamples): the collapse of two disjoint segments onto two parallel edges between single vertices identifies the two vertex points at level 0 and keeps regular points apart; a presentation whose pieces are the Sierpiński space, with non-Hausdorff realization, admits morphisms from discrete segments and onto a single segment, and its thickened raw pieces present its thickening; the presentation with empty pieces maps uniquely to every presentation.

One cylinder

TDA.Reeb.ThickeningSlice and TDA.Reeb.ThickeningCylinder present the thickening of one cylinder E × [a, d], for a ≤ d, ε ≥ 0 and an arbitrary topological space E. The thickened space is E × [a, d] × [-ε, ε] with height s + t (cylinderHeight); it is the geometric thickening of E × [a, d] with the segment coordinate as height, after reassociating the product (cylinderHeight_eq).

  • Slices. Under (s, t) ↦ (s, u = s + t) the thickened segment becomes the parallelogram {(s, u) | s ∈ J(u)} with J(u) = [max a (u - ε), min d (u + ε)], possibly empty or a point. When a (or d) lies in J(u) it is the lower (or upper) end. Between grid levels the ends move affinely; the transfer fragAff from the slice at c to the slice at u fixes a parameter at a segment end (SliceTransfer.fragAff_eq_left, fragAff_eq_right), and with transfer hypotheses in both directions the transfers are mutually inverse, with no nondegeneracy assumption (SliceTransfer.fragAff_fragAff). For a point slice the denominator of fragAff is 0, Lean's division returns 0, and the transfer is the constant lower end.
  • Presentation. On any grid G listing the four events a ± ε, d ± ε, cylinderThick has vertex piece E × J(b j), edge piece E × J(mid k) and endpoint maps the transfers to the slab ends. The endpoint maps collapse the reference slice at an end with a point slice; no inverse is asked of them. Pieces are empty where the slice is, and compact and locally path-connected when E is. The vertex strip is a = d; ε = 0 is not treated separately.
  • Homeomorphism. toCylinder sends (y, σ) at level b j to (y, σ, b j - σ) and ((y, σ), u) to (y, s, u - s), s = fragAff (mid k) u σ, and preserves height. The inverse is built in parallelogram coordinates on the finite closed cover by level slices and slab polygons. On a level slice it is the vertex inclusion. On a slab polygon it is the cylinder map descended along id_E × polygonMap k, which is a quotient map for every E because the scalar polygon map (σ, u) ↦ (fragAff (mid k) u σ, u) is a continuous surjection from a compact space onto a subset of ℝ × ℝ, hence proper. The cylinder map is constant on its fibres: inside the slab the transfer is injective, and at a collapsing end the realization identifies the cylinder end with its vertex image. Both inverse laws hold, so cylinderThickHomeomorph is a height-preserving homeomorphism for every topological E, with no Hausdorff or compactness hypothesis; vertexStripHomeomorph is the vertex strip E × [-ε, ε] with height a + t.
  • Boundary strips. On a common grid listing the events of [a, d], [a, a] and [d, d], botIncl and topIncl are presentation morphisms from the strip presentations into the cylinder presentation, and mapSpace f is the morphism f × id for a continuous f : E → E'. The homeomorphisms turn them into (y, t) ↦ (y, a, t), (y, t) ↦ (y, d, t) and f × id. For an endpoint map f : E → V, the bottom strip inclusion and mapSpace f into the vertex strip of V are therefore described by the pair of identities cylinderThickHomeomorph_realize_botIncl and vertexStripHomeomorph_realize_mapSpace, and botIncl_comp_mapSpace records their compatibility with mapSpace at the level of presentation morphisms.
  • The grid of one segment. For a < d, pairThick is the construction on the shifted witness of the two-level grid pair a d, whose levels are exactly the distinct values among a ± ε, d ± ε, with pairThickHomeomorph and the strip inclusions pairBotIncl, pairTopIncl.

Global assembly of a whole presentation and the constructibility of its thickening are not part of these modules.

Fixtures (TDA.Reeb.ThickeningSliceExamples, TDA.Reeb.ThickeningCylinderExamples): point slices and constant transfers at ε = 0; a vertex strip; coincident events d - ε = a + ε; a slab meeting [a - ε, d + ε] in a corner only, with empty polygon, empty edge piece and a point vertex piece at the corner; a non-injective collapsing endpoint map; and the Sierpiński space E = Prop, whose pieces and realization are not Hausdorff while the homeomorphism applies.

Windows and transfers

TDA.Reeb.ThickeningWindow defines the pieces of the thickening presentation. For a height c, write J(c) = [max a (c - ε), min d (c + ε)] for the slice of a segment [a, d] (Thickening.slice); for a vertex strip [a i, a i] it is {a i} or empty.

  • Window. The raw window at c is Σ V i × J_i(c) ⊕ Σ E e × J_e(c), with J_i(c) = slice (a i) (a i) ε c and J_e(c) = slice (a e) (a (e+1)) ε c. The window P.Window S ε c is its quotient by "same point of X", with the quotient topology. So windowMk is a quotient map by definition, also after product with a locally compact space (isQuotientMap_prodMap_windowMk), and two raw window points are identified exactly when their normal forms in P agree (windowMk_eq_iff). windowToSpace is a continuous injection into X with height in [c - ε, c + ε]. The window is compact, resp. locally path-connected, when all pieces are, as a quotient of a finite sum of products of pieces with compact intervals; it is empty when all pieces are. That the window is homeomorphic to the subspace f⁻¹[c - ε, c + ε] of X is not claimed; without a Hausdorff hypothesis, the quotient topology is the one used.
  • Transfer. Under RGraph.TransferOK S ε c u, every slice parameter moves by the affine fragment map RGraph.fragAff of its segment (rawTransfer); vertex parameters stay at a i. Slice ends at segment ends stay there, so glued points stay glued and the map descends to the continuous transfer : Window c → Window u (windowMk_rawTransfer_eq). In X it fixes vertex points and moves an edge point at parameter σ to fragAff … c u σ (windowToSpace_transfer_inl, windowToSpace_transfer_inr). At a slab end with a point slice it collapses a whole edge slice, so it need not be injective. Along a locally compact set U of target heights the transfers form one jointly continuous map transferFamily : Window c × U → X, descended along windowMk × id_U.
  • Interior inverse. With transfer hypotheses in both directions, for instance two heights of one open slab of a grid listing the shifted levels, the transfers are mutually inverse (transfer_transfer, transferHomeomorph). This holds for every ε ≥ 0: at a point slice the affine map is the constant lower end, by Lean's division by zero.

Fixtures (TDA.Reeb.ThickeningWindowExamples): for the single segment at ε = 1/4, the transfer of the window at 0 to the slab end -1/4 identifies two distinct edge points; at ε = 0 the transfer between 1/2 and 1/4 is a homeomorphism; a window of the presentation whose pieces are the Sierpiński space is compact and locally path-connected but not Hausdorff; windows far from the levels, and all windows of the presentation with empty pieces, are empty.

The general presentation

TDA.Reeb.ThickeningPresentation builds the thickening presentation P_ε of a cylinder presentation P over levels S and proves that it realizes the thickening. Write X = P.Realization S, f = P.height S, and let G be any grid listing every shifted level S.value i ± ε (S.ContainsShifted ε G).

  • Presentation. P.thick S ε G hG has vertex piece j the window at the level b j and edge piece k the window at the midpoint of slab k; the endpoint maps are the window transfers to the two slab ends. Its pieces are compact, resp. locally path-connected, when all pieces of P are: they are quotients of finite sums of compact (locally path-connected) spaces. Pieces are empty where no piece of P reaches, and coincident shifted values are single levels of G. On the shifted witness S.shifted ε, whose levels are the distinct values of (S - ε) ∪ (S + ε), it is shiftedThick.
  • Comparison. toProd : |P_ε| → X × [-ε, ε] is the universal map sending a vertex point ξ of level b j to (ξ, b j - f ξ) and a cylinder point (ξ, u) to (transfer ξ, u - f (transfer ξ)), through the band {(x, u) | u - ε ≤ f x ≤ u + ε} (toBand, slabCylinder) and GeometricThickening.bandHomeomorph. It carries the height of P_ε to f x + t (height_toProd).
  • Attachment maps. The per-piece thickening presentations of the one-cylinder construction, built directly on the common grid G, map into P_ε by presentation morphisms: edgeIncl e from cylinderThick (a e) (a (e+1)) ε (E e) G and vertexIncl i from cylinderThick (a i) (a i) ε (V i) G, each sending a slice point to its window class. After the per-piece homeomorphisms they are (y, s, t) ↦ ([y, s], t) and (v, t) ↦ ([v], t) (toProd_realize_edgeIncl, toProd_realize_vertexIncl).
  • Inverse. rawInv on the thickened raw pieces Σ V i × [-ε, ε] ⊕ Σ E e × [a e, a (e+1)] × [-ε, ε] pushes the inverses of the per-piece homeomorphisms into P_ε by Hom.realize. At a point of height a level it is a vertex point, over an open slab a cylinder point (rawInv_windowBand_value, rawInv_windowBand_of_mem_K). It respects the endpoint identifications of P (rawInv_segBot, rawInv_segTop): both sides are window points with the same image in X. So it depends only on normal forms (rawInv_nf) and descends along the quotient map quotMk × id (isQuotientMap_rawBandMap) to the continuous ofProd : X × [-ε, ε] → |P_ε|.
  • Homeomorphism. Both inverse laws are checked on generators with the universal property (toProd_ofProd, ofProd_toProd), so thickHomeomorph : |P_ε| ≃ₜ X × [-ε, ε] is a height-preserving homeomorphism (height_thickHomeomorph), with the inverse at generators thickHomeomorph_symm_quotMk, thickHomeomorph_symm_windowToSpace_value and thickHomeomorph_symm_windowToSpace_of_mem_K. It holds for pieces that are arbitrary topological spaces, every ε ≥ 0 and every such grid; no separation, compactness or positivity hypothesis is used, and continuity of the inverse comes from the quotient map, not from a compact-to-Hausdorff argument. The shifted-witness instance is shiftedThickHomeomorph.

Correspondence with the plan of Issue #708. Steps 1–3 (the vertex/cylinder/endpoint attachment diagram, its product with the band, and the per-piece thickenings) are the thickened raw pieces, isQuotientMap_rawBandMap, cylinderThick and cylinderThickHomeomorph. Steps 4–6 (refinement to the common grid, the componentwise colimit and the fixed-grid comparison) are realized as follows: the per-piece presentations are built directly on the common grid G, so empty pieces appear automatically and no refinement operation is defined; the attachment maps are the morphisms edgeIncl e and vertexIncl i into P_ε; and the colimit comparison is the descent of rawInv along quotMk × id, which exhibits X × [-ε, ε] as the quotient of the thickened pieces by the endpoint identifications. Agreement of the original endpoint relations with the refined attaching maps is rawInv_segBot, rawInv_segTop together with toProd_realize_edgeIncl and toProd_realize_vertexIncl. Only this fixed-grid, cylinder-compatible attachment diagram is covered, not arbitrary finite colimits of constructible ℝ-spaces. IsConstructibleSpace is unchanged; the constructibility consequence is assembled in TDA.Reeb.ThickeningConstructible (next section).

Fixtures (TDA.Reeb.ThickeningPresentationExamples), each applying the homeomorphism: one point at one level with no edges; the presentation with empty pieces, whose thickening presentation is empty, and a grid with an extra far level whose vertex piece is empty; the segment over pair 0 1 at ε = 1/2, whose shifted values 0 + ε = 1 - ε merge; ε = 0 on the grid S01, where a cylinder point at height u goes to the parameter u; and the Sierpiński presentation, whose thickening presentation has compact locally path-connected pieces and a non-Hausdorff realization.

Theorem 4.27

TDA.Reeb.ThickeningConstructible assembles the constructibility of thickenings from the general presentation, with no further geometric argument.

  • Over ℝ. For a presentation P over levels S, thickOverIso is the isomorphism over ℝ from the thickening of the realization (GeometricThickening.functor ε applied to Over.mk (P.height S)) to the realization of P.shiftedThick S ε over the shifted witness S.shifted ε. Its underlying map is the inverse of shiftedThickHomeomorph (thickOverIso_hom_left_apply), and its height equation is height_thickHomeomorph_symm. No hypothesis on the pieces is used. For A ≅ |P| over ℝ, thickOverIsoOfIso composes the thickening of that isomorphism with thickOverIso.
  • Presentation level. If the pieces of P are compact and locally path-connected, so are the windows of P.shiftedThick S ε, and the thickening of |P| is constructible, presented on S.shifted ε (isConstructibleSpace_thickening_realization).
  • General form. isConstructibleSpace_thickening_of_isConstructibleSpace: for every A : Over (TopCat.of ℝ) with IsConstructibleSpace A and every ε : ℝ≥0, the thickening (GeometricThickening.functor ε).obj A is constructible. The proof takes the presentation and the isomorphism A ≅ |P| supplied by IsConstructibleSpace and applies thickOverIsoOfIso. There is no Hausdorff hypothesis on A or on the pieces, no positivity hypothesis on ε, and IsConstructibleSpace is unchanged. The name is chosen to differ from the graph statement RGraph.isConstructibleSpace_thickening.
  • Critical set. If A is presented over S, its thickening is presented over S.shifted ε, whose levels are the distinct values of (S - ε) ∪ (S + ε) in increasing order (CriticalValues.mem_range_shifted_iff). This is an admissible critical set for the thickened height, not necessarily the minimal one; no candidate value is asserted to be essential.
  • Fibers. The vertex piece of P.shiftedThick S ε at a shifted level b j, the window at b j, is homeomorphic to the fiber of the thickened height over b j by ξ ↦ (ξ, b j - f ξ) (windowFiberHomeomorph, coe_windowFiberHomeomorph), through criticalFiberHomeomorph of the thickening presentation and the homeomorphism. It is derived from the homeomorphism and is not used in the construction, which uses only the quotient topology of the window.
  • Functor. thickeningFunctor ε : ConstructibleSpaceCat ⥤ ConstructibleSpaceCat lifts GeometricThickening.functor ε on all height-preserving maps (thickeningFunctor_comp_ι). Its comparison with the smoothing of constructible cosheaves (Theorem 4.24 restricted to constructible ℝ-spaces) and the companion for the Reeb quotient of the thickening are in reeb-thickening-cosheaf-comparison.md.
  • Graph input. isConstructibleSpace_thickening_of_isRGraph derives the graph statement from the general one through isConstructibleSpace_of_isRGraph. On graph objects the lift is the graph lift: RGraph.rgraphToConstructible ⋙ thickeningFunctor ε = RGraph.thickeningToConstructible ε (rgraphToConstructible_comp_thickeningFunctor). The existing graph results and their proof (see reeb-rgraph-thickening.md) are unchanged; the general route presents a graph thickening by windows, which are compact and locally path-connected but not finite discrete, also at ε = 0.
  • Reeb quotient. Followed by the Reeb quotient, the lift is the existing RGraph.thickeningQuotient ε (thickeningFunctor_comp_quotientRGraphFunctor). The statement that ℛ T_ε X is a graph object (isRGraph_quotient_thickening_of_isConstructibleSpace, see reeb-quotient-thickening-absorption.md) remains a distinct statement with its own proof; the equation only identifies the two functors.

Fixtures (TDA.Reeb.ThickeningConstructibleExamples): a compact locally path-connected space at constant height c is constructible, and so is its thickening, with shifted levels c - ε and c + ε; the indiscrete two-point space at constant height is constructible, its thickening is constructible, and neither the thickened space nor any vertex piece of its thickening presentation is Hausdorff, so the theorem does not specialize to Hausdorff inputs; ε = 0 by the general theorem and, independently, through zeroIso; the empty space, whose thickening is constructible and empty; and S = {0, 2} at ε = 1, whose four shifted values merge to three levels (shiftedCount = 2), with the theorem applied to the segment over S.

Source correspondence

de Silva, Munch and Patel, Categorified Reeb Graphs, §2.2, define constructible ℝ-spaces as realizations of compact locally path-connected pieces, and Theorem 4.27 states that the thickening of a constructible ℝ-space is constructible; its proof builds the thickening from the windows and fibers of the input. With IsConstructibleSpace for the source's ℝ-Topᶜ, Theorem 4.27 is claimed here in general form: isConstructibleSpace_thickening_of_isConstructibleSpace, for every constructible ℝ-space and every ε ≥ 0, with pieces that need not be Hausdorff. The critical set of the proof, (S - ε) ∪ (S + ε) in increasing order, is S.shifted ε; it is used as an admissible critical set. Corollary 4.28 states that f_ε has critical set (S - ε) ∪ (S + ε) when f has critical set S; in the sense of a set over which the thickening is presented, this is isConstructibleSpace_thickening_of_isConstructibleSpace, through thickOverIsoOfIso, and on a presentation isConstructibleSpace_thickening_realization. Minimality, that every value of S.shifted ε is essential for f_ε, is not claimed. The tools, the one-cylinder presentation and the general presentation above are library statements on which the theorem rests. The source's proof ends with a fiberwise bijection and the compact-to-Hausdorff theorem; for non-Hausdorff pieces the inverse is instead shown continuous by the quotient-topology comparison of the general presentation. This records a different proof route for the library's broader class, not an error in the source. Graph input (Proposition 4.26) is a specialization (isConstructibleSpace_thickening_of_isRGraph; see reeb-rgraph-thickening.md for the graph case formalized earlier), and the Reeb-quotient statement of reeb-quotient-thickening-absorption.md remains distinct.

The statements of Theorem 4.27 and Corollary 4.28 and the steps of the proof of Theorem 4.27 were compared with the HTML version of arXiv:1501.04147v1.

Source: de Silva, Munch and Patel, Categorified Reeb Graphs, §2.2 and §4.3, Theorem 4.27 and Corollary 4.28.